AONN.

Home  /  Elevator solutions

Passenger & commercial

Passenger and commercial elevators

For apartment buildings, offices and institutions, the elevator is infrastructure — judged on whether people wait and whether it keeps running.

The common and expensive mistake is sizing on floor count alone. A six-floor office with 400 staff arriving within the same half hour has a completely different requirement from a six-floor residential block with twelve families.

What determines the specification

FactorWhat it decides
Occupancy and use patternHow much traffic the system must clear, and when it peaks
Number of stops and travel heightRound-trip time and system type
Rated load and capacityCabin size and equipment class
SpeedWaiting and journey time, especially in taller buildings
Number of unitsWhether one elevator suffices or a group is needed
Duty cycleStarts per hour, which drives wear and maintenance need
Accessibility needsCabin dimensions, door width, controls, levelling
Shaft and structureWhat the building can physically accommodate

For buildings with concentrated peaks — offices, hospitals, schools, cinemas — arrival rate matters more than headcount. Sizing for the peak is the difference between an elevator that works and one everyone complains about.

Specifying for the building's whole life

Three decisions made at purchase determine cost for twenty years.

Under-specifying capacity

Cheaper at purchase; produces queueing, higher duty and faster wear for the building's whole life. Rarely economic.

Ignoring parts availability

Equipment chosen on price alone can become difficult to support. Ask what happens in year twelve when a board fails.

Deferring the maintenance decision

Maintenance cost is part of the purchase decision, not a separate matter settled afterwards.

Common questions

How many elevators does a building need?

It depends on occupancy, peak arrival rate, number of floors and acceptable waiting time — not on floor count alone. A traffic assessment answers it properly.

What capacity should we specify?

Capacity follows expected traffic and what the shaft allows. Where accessibility is required, minimum cabin dimensions may also apply.

Machine room or machine-room-less?

Both are used widely. The choice depends on available space, building design and the equipment specified.

What affects running cost?

System type and efficiency, usage intensity, maintenance quality, and how available spare parts remain over time.

Can you work on our existing elevators too?

Yes — we service equipment from other manufacturers on a multi-brand basis, subject to feasibility and parts availability.

Tell us about the building.