Bespoke elevators
In a house or hotel where every surface has been considered, a standard cabin is the one element chosen from a catalogue.
A bespoke elevator is designed the other way round: the interior is developed with the architecture, and the engineering is specified to carry it.
That second half is where bespoke elevator projects succeed or fail. A cabin design is only buildable if the shaft, pit, headroom, structure and power can support what it weighs and how it is finished. We work on both halves at once, which is why we would rather be involved while the drawings are still changing.
The following are options commonly available on bespoke elevator projects, subject to equipment platform, technical feasibility and applicable requirements. What is achievable on a given project is confirmed at survey.
| Element | Typical options |
|---|---|
| Cabin walls | Wood veneer, stone, leather, lacquered panels, patterned or mirrored metal, textile |
| Metalwork | Stainless steel in brushed, polished, hairline or coloured finishes; brass and bronze finishes |
| Glass | Toughened and laminated panels, tinted, frosted or printed; glazed cabins and shafts |
| Flooring | Stone, engineered wood, porcelain, metal; matched to the adjoining floor finish |
| Ceiling & lighting | Integrated LED, indirect perimeter lighting, lit ceiling panels, decorative fixtures |
| Handrails | Metal, timber, leather-wrapped; proportioned to the cabin |
| Doors & entrances | Finish-matched landing doors, glazed doors, architrave and surround detailing |
| Controls & signalling | Finish-matched panels, touch and backlit controls, display styling |
Two constraints worth knowing early. Finish weight counts against the elevator's rated load and must be designed for, so a stone-clad cabin reduces usable capacity unless the equipment is specified accordingly. And cladding thickness eats into internal dimensions — the finished cabin is always smaller than the structural shaft, sometimes by more than clients expect.
Design ambition is limited by the structure. These are the items that decide what is possible.
| Requirement | Why it matters |
|---|---|
| Shaft dimensions | Set the maximum cabin size before finishes; cladding reduces the internal result further |
| Pit depth | Houses buffers and equipment below the lowest floor; a shallow pit restricts the options |
| Overhead clearance | Headroom above the top floor for travel and safety provisions |
| Structural capacity | Walls and slab must carry the equipment's static and dynamic loads |
| Power supply | Correct supply and protection; standby arrangements where continuity matters |
| Machine space | Depends on whether the system requires a machine room |
| Installation access | Large finished components must physically reach the shaft |
| Maintenance access | Safe access must exist for the equipment's whole service life |
A retrofit into an existing home is the constrained case: pit depth and headroom are usually fixed, and they determine which systems are viable before any design conversation begins.
We are used to working as part of a design team rather than as a supplier at the end of it. In practice that means shaft dimensions and provisions issued early enough to be built in, cabin design developed against the real engineering envelope, finishes coordinated with the wider interior scheme, and door and entrance detailing resolved with the architrave and wall build-up — the detail that most often looks wrong when it is settled late.
Private clients generally do not want their homes used as marketing material. We ask before anything is photographed or named.
Often, yes — but the existing shaft, pit and headroom decide which systems are viable and how much internal space survives the finishes. A survey answers this before any design work is worth doing.
It affects capacity. Finish weight counts against rated load, so a heavily clad cabin either carries fewer people or needs equipment specified for the additional weight from the start.
Usually closely, sometimes exactly. Materials must also satisfy the safety and durability requirements applying to elevator interiors, and a material that performs well on a wall does not always qualify inside a cabin.
The machinery is maintained conventionally. The finishes need appropriate care, which is agreed at handover.