Passenger & commercial
For apartment buildings, offices and institutions, the elevator is infrastructure — judged on whether people wait and whether it keeps running.
The common and expensive mistake is sizing on floor count alone. A six-floor office with 400 staff arriving within the same half hour has a completely different requirement from a six-floor residential block with twelve families.
| Factor | What it decides |
|---|---|
| Occupancy and use pattern | How much traffic the system must clear, and when it peaks |
| Number of stops and travel height | Round-trip time and system type |
| Rated load and capacity | Cabin size and equipment class |
| Speed | Waiting and journey time, especially in taller buildings |
| Number of units | Whether one elevator suffices or a group is needed |
| Duty cycle | Starts per hour, which drives wear and maintenance need |
| Accessibility needs | Cabin dimensions, door width, controls, levelling |
| Shaft and structure | What the building can physically accommodate |
For buildings with concentrated peaks — offices, hospitals, schools, cinemas — arrival rate matters more than headcount. Sizing for the peak is the difference between an elevator that works and one everyone complains about.
Three decisions made at purchase determine cost for twenty years.
Cheaper at purchase; produces queueing, higher duty and faster wear for the building's whole life. Rarely economic.
Equipment chosen on price alone can become difficult to support. Ask what happens in year twelve when a board fails.
Maintenance cost is part of the purchase decision, not a separate matter settled afterwards.
It depends on occupancy, peak arrival rate, number of floors and acceptable waiting time — not on floor count alone. A traffic assessment answers it properly.
Capacity follows expected traffic and what the shaft allows. Where accessibility is required, minimum cabin dimensions may also apply.
Both are used widely. The choice depends on available space, building design and the equipment specified.
System type and efficiency, usage intensity, maintenance quality, and how available spare parts remain over time.
Yes — we service equipment from other manufacturers on a multi-brand basis, subject to feasibility and parts availability.